IdeaMaker Profiles

– downloads 

 

 

Once Downloaded: use the Import->Import from local disk option on the ‘Select Template’ option found under start slicing.

Artillery Sidewinder X1 (v4+)

 

Installed under Primary Extruder: “Raise3d PLA 1.75”

  1. PLA Sidewinder 0.4 Standard
  2. PLA Sidewinder 0.4 Stronger
  3. PLA Sidewinder 0.6 Standard

Installed under Primary Extruder: “Raise3d PETG 1.75”

  1. PETG Sidewinder 0.4 Standard
  2. PETG Sidewinder 0.6 Standard

 

SOVOL SV01

 

Installed under Primary Extruder: “Raise3d ABS 1.75”

  1. ABS SV01 0.4 Standard

Installed under Primary Extruder: “Raise3d PETG 1.75”

  1. PETG SV01 0.4 Standard

Installed under Primary Extruder: “Raise3d PLA 1.75”

  1. PLA SV01 0.4 Standard

Flsun QQ-s Pro

Installed under Primary Extruder: “Raise3d PLA 1.75”

  1. PLA Flsun QQ S 0.4 Std.bin

Flsun Q5

Installed under Primary Extruder: “Raise3d PLA 1.75”

  1. PLA Flsun Q5 Lithophane.bin
  2. PLA Flsun Q5 Rapid Prototyping.bin
  3. PLA Flsun Q5 0.4mm Standard.bin

Monoprice Delta Pro

Printer Profile: Monoprice Delta Pro.printer (remove the “.bin” extension after downloading)

Installed under Primary Extruder: “Raise3d PLA 1.75”

  1. PLA Mp Delta Pro Standard 0.4mm.bin
  2. PLA Mp Delta Pro Lithophane 0.4mm.bin
  3. PLA+ Mp Delta Pro 0.4mm.bin**
  4. PLA Wood Mp Delta Pro 0.4mm.bin**

Installed under Primary Extruder: “Raise3d PETG 1.75”

  1. PETG Mp Delta Pro 0.4mm .bin**

** Thank you Morris Jamlang

(No, not another printer, please!)